From small products such as stationery and IC cases to large products including interior and exterior construction materials, these products are used in every industrial field. | ![]() |
Usage example
|
||||||
|
![]() |
![]() |
![]() |
Displays | Outer case for ballpoint pens |
Office products
![]() |
![]() |
![]() |
Electronic whiteboard components | Partition components |
Extruded Products
Two resin materials with different hardness’s can be molded together at the same time. This technology
is used in the production of gaskets, where the softer portion maintains airtightness and the harder portion
holds the softer portion in place. |
![]() |
|
|
Composite molding is a technology where quite different materials like resins and metals are molded together,
whereas two-color molding is a simultaneous molding of different resins. This technology is used in molded
products like our synthetic lumber and SK
series, which are high strength and reduce linear expansion. Such properties cannot be obtained with a
single resin. There are several types of this process, including an insert type (where metal plates are included
in the resin) and a surface adhesion type (where metal plates are adhered to the resin surfaces). |
![]() |
|
|
This is a molding technology where the resin is low-formed chemically. This technology reduces product weight
and improves quality. Expansion and contraction due to temperature change is reduced and it is possible to
mold scratch-resistant products by adjusting the skin layer (surface layer) to increase surface hardness.
Additionally, these materials can be saw cut, nailed and tucked and are widely used in housing interiors and
exteriors as lumber substitutes. |
![]() |